Basic Device Info
- USB Flash media card reader/writer device series.
- Dual-port, supporting XD and SmartMedia flash cards.
- Has door to allow/prevent card removal. The device is able to detect the door status (open/closed) via a microswitch.
- Has an LED that blinks on data transfer.
- USB 1.1 compliant
- 3 endpoints
- Combined control/bulk software interface, with the majority of commands (and all data) being sent over bulk.
- Provides 'raw' access to the media, leaving it up to the driver to handle things like physical to logical (PBA to/from LBA) address translation
Bus 002 Device 002: ID 07b4:010a Olympus Optical Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07b4 Olympus Optical Co., Ltd
idProduct 0x010a
bcdDevice 1.02
iManufacturer 1 OLYMPUS OPTICAL CO.,LTD.
iProduct 2 USB Media Adapter
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 80mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
There are no comments on this page. [Add comment]